Our Products


Balterio Grande Narrow Spring Oak 64088 Laminate Flooring


Congratulations. You have now found a laminate floor that can do it all. The Balterio Grande Narrow Spring Oak 64088, not only has long and narrow planks, it’s also waterproof, meaning for the first time in the Balterio range you can install it in a bathroom. This grey/brown coloured laminate flooring is unbelievably realistic, it resembles hardwood to an absolute tee. Having a long and wide board, combined with an ultra-high definition design that’s so precise, you can identify every vibrant knot and wood grain.
The attention to detail is remarkable in the Balterio Grande Narrow Spring Oak, this is enhanced by the unique and subtle 4-sided parquet bevel.

Why not check out our matching scotia beading that goes perfect with the Balterio flooring


Product Code: 64088

Suitable for:

Dining Room
Hall Way
Living Room
Under-Floor Heating

Pack Coverage: 2.0541 m2Edge Detail: Bevelled 4v Installation Method: ClickPlanks Per Pack: 6 PlanksMaterial: Oak EffectDomestic Warranty: 25 YearsCommercial Warranty: 12 YearsBoard Dimentions: 2050mm (l) x 167mm (w) x 9mm (t)Range: Balterio Grande NarrowDurability Rating: AC4Pack Content: Thickness: 9mmPack Price: £ 59.55

Any questions?

We are always happy to help advise on any aspect of your flooring project. Get in touch with us with any of the options shown.


Enquiry Form

Please complete the form below

Enquiry Form

£36.29 per m2 £28.99 per m2

Original price was: £74.54.Current price is: £59.55. inc V.A.T.

Out of Stock

Free delivery over £600

Enter the area (m2) of your floorspace

Room Area Short

Full Project Calculator

Your Project Calculator

Enter the dimensions of your floor space or just add the area if you already know it. Add as many section/room dimensions as you need and click 'Save Project' to store the total. Then browse our products with the total price of your project.

For more details and information about how to measure a room see our guide

Room Area

Area Section

Add width m
Add length m
Or add area (m2)

Your Current Project is m2

Out of Stock

If a deal's there to be made, let's make it.

Call us for the best price when buying in bulk

Finance Available


There are no reviews yet.

Be the first to review “Balterio Grande Narrow Spring Oak 64088 Laminate Flooring”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Trustpilot Reviews

Delivery Costs

Delivery Service Price Details
Standard Delivery Free/£45
  • Deliveries can be within 48hrs / 72hrs
  • Deliveries kerbside only
  • Free on orders over £499, otherwise £45. (UK Mainland Only)
  • Please call for quotes on specialist deliveries such as next day. We will try to accommodate when possible  


AB Postcodes £65


Please be aware that customers living outside of Mainland UK or in some territories of Scotland may not be eligible for all delivery services. Deliveries outside mainland UK may incur extra delivery charges. Once you have secured your order online we will be in contact to arrange the best delivery options available. Unfortunately we don’t cover Northern/ Southern Ireland 


Fitting Laminate Flooring 

Fitting laminate flooring is one of the easiest options, as it comes with a click joining system. However, some of the systems are slightly different, so It’s important to read the full manufactures fitting instructions first. We have provided you with a few generic tips on what you’ll need to do.

  • Make sure you leave a 10mm expansion gap around the edge of your room.
  • Allow 48 hours for a laminate floor to acclimatise – see full guide on acclimatisation 
  • Try and make sure you subfloor is as level as possible 
  • Use spaces and  a fitting kit 

As all laminates use the ‘floating’ method of installation, you will need to use a suitable underlay to protect your floor. Underlay’s not only protect your flooring, they provide sound and heat insulation.

Handy Links for Laminate

Fitting Solid and Engineered

  • ‘Floating’ is the most popular method of installing for engineered floors. This is where the joins locks together and the boards sit neatly on top on an underlay. Joining methods can vary in Engineered Floors.
  • Tongue and Grove requires  PVA wood glue between the seams to create a strong bond.                      This allows the floor to breath naturally as it is not fixed down to the subfloor.
  • Click System are available in some engineered floors, they work the same as laminates.            
  • ‘Fixing’ the flooring down to the subfloor is also a very popular method and is the preferred method for Solid Wood Floors. You have two methods with this option. 
  • Gluing the flooring directly to the subfloor using suitable adhesive.                                                                –
  • Secret Nailing the floor into a suitable wooden subfloor. 

Top Tips..

  • Allow at least 48 hours for Engineered to acclimatise 
  • Allow at least 7 Days for Solid Wood to acclimatise 
  • Try and make sure the subfloor is level
  • Make sure you leave the required expansion gap.


Handy links for Solid Wood and Engineered.

  • Manufactures Guides 
  • Detailed Guides 
  • Fitting tools 

Fitting Luxury Vinyl Glue Down


Firstly, like all flooring you have to allow time for the flooring to acclimatise. All you need to do is leave the boxes in the middle of the room for 48 hours. Keep the temperature of the room at a consistent level. Clean the subfloor, making sure its dirt/rubble free. Best way to do this is sweep, vacuum and mop before leaving to dry. The subfloor also needs to be level, which means less than 3mm deviation over a 1m area. 

The next stage is ensuring the positioning is right, the last thing you want is an unsymmetrical floor. This is probably easier than you think. Start by finding the centre of the room, to do this you need to measure the width and length and strike a chalk line halfway across both. Where the two lines meet, that is the centre. Without using any adhesive, lay two lines of flooring from the centre of the room at right angles to each others to make an L shape. This ensure you are laying the floor at the correct angle, make sure the edges line up with the wall, if that don’t, manoeuvre the boards around until they do.


Now the preparation is down and the boards are in position, you can start to stick them down. To do this you will either need to apply a thin layer of adhesive to the suitable subfloor, or peel off the non-stick backing if its a self adhesive LVT floor. In the event of glue oozing up between the boards, clean it off immediately with wet cloth or sponge. Its always worth having a good read through the manufacturers guides when using adhesive, as the requirements may be different depending on the brand. After you have installed a section of the floor, apply pressure using a roller to bond the boards to the subfloor. After you’ve installed the majority of the boards, you will need to start making the cuts to fit the gaps against the wall. The best and most accurate way to do this is to lay the board directly on top of a laid board. Then,  take a 3rd board and lay it on top against the wall. Using the edge of the 3rd tile to draw a cutting line across the board you want to fit.

Top Tips..

  • Allow 48hrs to Acclimatise 
  • Make sure the subfloor is level and clean
  • If you have to work on an area that you have just adhered down, use a piece of ply board to cover the area. That will ensure you weight is spread evenly and should prevent movement on the fitted boards
  • The best way to cut a vinyl tile, is to use a knife, slice through the surface layer , then simply bend the board until it snaps apart





If all of a sudden you change your mind on the flooring and want to return it.. that’s no problem. We’ll give you 14 days to return the goods back to us and you’ll get a refund. Also, we will take back any unused accessories once you’ve installed your flooring. 

On certain products there maybe some restrictions or a small 15% restocking fee. Please contact our customer service team to find out if this applies to the product you are looking at. 

Why not take a look at our full returns and cancellation policy here



If you want your floor to look great for years to come, here’s a few tips on how to maintain that brand new look.


Sweep it up

Try and sweep up any dirty up that you notice on your floor. Or alternatively, use a hand vacuum to collect the dirt.

Vacuum Regularly 

Make sure you vacuum your flooring on a regular basis. Not only is this hygienic but it also gets up any loose dirt and small stones that could scratch the floor. 

Felt protector pads on furniture 

To prevent damage to your new floor, you should use protector pads at the bottom of all your furniture and furniture legs.

Clean your floor with the right stuff

Using specifically designed cleaner will safely remove any dust or stubborn marks. It will also leave you floor with a nice, clean finish.

Wipe up your spill ASAP

Clean up spillages such as drinks, water and pet urine as quickly as possible. This will most definitely help maintain the appearance and stop moister getting in areas you don’t want. 

Use entrance matts

Using entrance matts on all exterior doors will reduce the chance of items entering your home that can potentially damage your floor. 

Tips for house hold pets

Make sure that your pets nails are trimmed, this will prevent scratches according on your  floor. Also, you should put a matt underneath any food or water bowls, this will prevent moisture going into the joins.


Unit 5, Ashville Industrial Estate, Sutton Weaver, Runcorn, Cheshire, England, WA7 3EZ

Opening Hours

Online Customer Services Times
Mon - Fri 8.30am to 5.30pm
Sat - 9am to 1pm
Closed Sunday
Showroom Opening Times
Mon - Fri 9.00am to 5.00pm
Sat - 10am to 1pm
Closed Sunday


Keep up to date with all the latest news and offers from Northwest Floors

This website uses Cookies to improve your browsing experience and to help with our marketing. You can read more about removing Cookies here: Cookie Policy

I'm fine with this