The Mocha Oak design from the Capital Creation Vinyl Plank collection is truly magnificent. Now in most cases, you would need to sacrifice something to achieve the perfect look, but not with this. The Mocha Oak Vinyl Plank has an exceptional design and the structure to match.
The warm-brown colour is natural looking and the definition of the board is truly unique in the vinyl market. What makes this board so unique? The planks are made from rigid core vinyl, this allows installation to take place in areas that most click vinyl would not be suitable. For instance, conservatories, which can cause issues due to the extreme heat changes. The Capital Creation is made from a mixture of stone and PVC, therefore the extreme temperatures do not affect the stability of the board. What’s more, the surface finish of the Mocha Oak Vinyl Plank is registered embossed. This means the texture of the board matches perfectly with the rustic grain design, giving the board a truly authentic appearance and feel.
The Capital Creation collection is 100% waterproof, so installation in areas such as kitchens, utilities and bathrooms are no problem. Also, thanks to the scratch and stain-resistant surface this is the perfect choice for households with children and pets. Any accidents can be cleared up easily without the stress of it damaging the flooring. Along with all these amazing attributes, the capital creation range comes with a pre-attached rubber underlay. This means you install the flooring quicker and easier than standard click vinyl. Because of this, you also save a tonne of money by not having to purchase addition underlay.
If you would like to take a closer look at this floor, why not order a sample from us which can be delivered to you in only a few days.
The Mocha Oak Vinyl plank is also available in a showstopping herringbone design, why not check it out here
Pack Coverage: 2.85 m2Installation Method: Uniclic Planks Per Pack: 30 PlanksMaterial: SPC Vinyl Domestic Warranty: 20 YearsBoard Dimentions: 1220mm (l) x 180mm (w) x 5mm (t)Range: Capital CreationThickness: 5mm (0.55mm wear layer)Pack Price: £ 92.02
We are always happy to help advise on any aspect of your flooring project. Get in touch with us with any of the options shown.Enquire
Please complete the form below
£92.02 inc V.A.T.
Enter the area (m2) of your floorspace
Enter the dimensions of your floor space or just add the area if you already know it. Add as many section/room dimensions as you need and click 'Save Project' to store the total. Then browse our products with the total price of your project.
For more details and information about how to measure a room see our guide
If you want to make sure that this is the right product for your project why not order a sample and see how it looks in place. Click on the button below to order your sample.Order Sample
If a deal's there to be made, let's make it.
Call us for the best price when buying in bulk
Please be aware that customers living outside of Mainland UK or in some territories of Scotland may not be eligible for all delivery services. Deliveries outside mainland UK may incur extra delivery charges. Once you have secured your order online we will be in contact to arrange the best delivery options available. Unfortunately we don’t cover Northern Ireland
Fitting Laminate Flooring
Fitting laminate flooring is one of the easiest options, as it comes with a click joining system. However, some of the systems are slightly different, so It’s important to read the full manufactures fitting instructions first. We have provided you with a few generic tips on what you’ll need to do.
As all laminates use the ‘floating’ method of installation, you will need to use a suitable underlay to protect your floor. Underlay’s not only protect your flooring, they provide sound and heat insulation.
Handy Links for Laminate
Fitting Solid and Engineered
Handy links for Solid Wood and Engineered.
Fitting Luxury Vinyl Glue Down
Firstly, like all flooring you have to allow time for the flooring to acclimatise. All you need to do is leave the boxes in the middle of the room for 48 hours. Keep the temperature of the room at a consistent level. Clean the subfloor, making sure its dirt/rubble free. Best way to do this is sweep, vacuum and mop before leaving to dry. The subfloor also needs to be level, which means less than 3mm deviation over a 1m area.
The next stage is ensuring the positioning is right, the last thing you want is an unsymmetrical floor. This is probably easier than you think. Start by finding the centre of the room, to do this you need to measure the width and length and strike a chalk line halfway across both. Where the two lines meet, that is the centre. Without using any adhesive, lay two lines of flooring from the centre of the room at right angles to each others to make an L shape. This ensure you are laying the floor at the correct angle, make sure the edges line up with the wall, if that don’t, manoeuvre the boards around until they do.
Now the preparation is down and the boards are in position, you can start to stick them down. To do this you will either need to apply a thin layer of adhesive to the suitable subfloor, or peel off the non-stick backing if its a self adhesive LVT floor. In the event of glue oozing up between the boards, clean it off immediately with wet cloth or sponge. Its always worth having a good read through the manufacturers guides when using adhesive, as the requirements may be different depending on the brand. After you have installed a section of the floor, apply pressure using a roller to bond the boards to the subfloor. After you’ve installed the majority of the boards, you will need to start making the cuts to fit the gaps against the wall. The best and most accurate way to do this is to lay the board directly on top of a laid board. Then, take a 3rd board and lay it on top against the wall. Using the edge of the 3rd tile to draw a cutting line across the board you want to fit.
If all of a sudden you change your mind on the flooring and want to return it.. that’s no problem. We’ll give you 14 days to return the goods back to us and you’ll get a refund. Also, we will take back any unused accessories once you’ve installed your flooring.
On certain products there maybe some restrictions or a small 15% restocking fee. Please contact our customer service team to find out if this applies to the product you are looking at.
Why not take a look at our full returns and cancellation policy here
If you want your floor to look great for years to come, here’s a few tips on how to maintain that brand new look.
Sweep it up
Try and sweep up any dirty up that you notice on your floor. Or alternatively, use a hand vacuum to collect the dirt.
Make sure you vacuum your flooring on a regular basis. Not only is this hygienic but it also gets up any loose dirt and small stones that could scratch the floor.
Felt protector pads on furniture
To prevent damage to your new floor, you should use protector pads at the bottom of all your furniture and furniture legs.
Clean your floor with the right stuff
Using specifically designed cleaner will safely remove any dust or stubborn marks. It will also leave you floor with a nice, clean finish.
Wipe up your spill ASAP
Clean up spillages such as drinks, water and pet urine as quickly as possible. This will most definitely help maintain the appearance and stop moister getting in areas you don’t want.
Use entrance matts
Using entrance matts on all exterior doors will reduce the chance of items entering your home that can potentially damage your floor.
Tips for house hold pets
Make sure that your pets nails are trimmed, this will prevent scratches according on your floor. Also, you should put a matt underneath any food or water bowls, this will prevent moisture going into the joins.
Unit 5, Ashville Industrial Estate, Sutton Weaver, Runcorn, Cheshire, England, WA7 3EZ
Keep up to date with all the latest news and offers from Northwest Floors